A hollow cone spray
pattern with smaller droplet size
SPRAY CHARACTERISTICS:
A hollow cone spray pattern, emerging at right angles to the
centerline of the pipe connection. The standard included angle
of the spray cone is 70° at 10 p.s.i. At low pressures hollow
cone nozzles produce medium size, uniform droplets. At higher
pressures finer droplets are produced.
TYPICAL APPLICATIONS:
- Air and Gas Washing
- Aerating, Rinsing and Humidifying
- Industrial Washers and Spray Ponds
- Cooling Tunnels
- Roof Cooling
- Degreasing
- Dust Suppression
- Metal Treatment
HW
Series
Wide Angle Hollow cone Spray
SPRAY CHARACTERISTICS:
A hollow cone spray pattern, similar to the BEX H series, but with a wider spray angles. The included angle of the spray cone is 120° at 10 p.s.i.
TYPICAL APPLICATIONS:
- Water Cooling
- Roof Cooling
- Air Cooling
- Air Washing
PH
Series
Phosphating Hollow cone Spray
SPRAY CHARACTERISTICS:
A hollow cone spray pattern for phosphating applications. This large droplet low impingement type of spray resultes in a tighter and more consistent phosphating crystalline structure.
TYPICAL APPLICATIONS:
- Water Cooling
- Roof Cooling
- Air Cooling
- Metal Treatment
ILH
Series
In-Line Hollow Cone Spray
SPRAY CHARACTERISTICS:
ILH series in-line hollow cone spray nozzles produce a very evenly distributed hollow cone spray which emerges through the center axis of the nozzle body. At lower pressures, they produce medium sized, uniform droplets. Finer droplets are produced at higher pressures.
SPRAY CHARACTERISTICS:
A hollow cone spray pattern with larger flow rates and smaller droplet sizes. Durable, one-piece, anti-clog design has no internal vane to clog or wear out.
TYPICAL APPLICATIONS:
- Air & Gas Washing
- Dust Suppression
- Spray Ponds
- Cooling Tunnels
- Medical Treatment
- Humidification
C
Series
>
Very fine hollow
cone spray
SPRAY CHARACTERISTICS:
C series hydraulic atomizing nozzles are designed and precision
machined to provide a very fine hollow-cone spray using only
the liquid pressure for atomizing.
