SPRAY CHARACTERISTICS:
F-Series spray nozzles produce a flat, fan-shaped spray pattern, with spray angles available from 0° solid stream to 110° fans measured at 40 psi. Spray angles generally increase with pressure.

TYPICAL APPLICATIONS:
Suitable for a variety of washing and spraying applications.
- Parts Cleaning
- Metal Washing
- Foam Control
- Asphalt Spraying
- Gravel Washing
- Vehicle Washing
- Fertilizer Spraying
- Dishwashers

SPRAY CHARACTERISTICS:
0° F-Series spray nozzles produce a high impact sold stream. Used in situations where maximum impact is required over a very small target area.

TYPICAL APPLICATIONS:
- Metal Washing
- Agitation
- Mixing

SPRAY CHARACTERISTICS:
A wide, flat fan-shaped spray with low impact. The spray is deflected 75° away from the centerline of the pipe connection, as shown.

TYPICAL APPLICATIONS:
Wherever a low impact, wide angle spray is required.
- Rinsing and Cooling
- Dishwashing
- Fertilizer Spraying
- Metal Wash 75° Angle of Deflection version available (3/8" longer)

SPRAY CHARACTERISTICS:
A flat and thin fan-shaped spray with sharp definition on all edges. This spray delivers very high impact over the area covered. The spray is deflected by angle D away from the centerline of the spray nozzle.

TYPICAL APPLICATIONS:
- High Impact Applications
- Metal Wash
- Gravel Washing
- Vehicle Washing

SPRAY CHARACTERISTICS:
STF-Series spray nozzles produce a flat fan-shaped spray pattern, similar to the F Series. Spray density tapers off toward the outside edges of these sprays, to permit overlapping of spray patterns while maintaining uniform spray density. Spray angles are available for a 0° solid stream to 90°, measured at 40 psi. Spray angles generally increase with pressure.

TYPICAL APPLICATIONS:
Suitable for a variety of washing and spraying applications.
- Parts Cleaning
- Metal Washing
- Dishwashers

SPRAY CHARACTERISTICS:
DF-Series thin-disc flat spray nozzles are used where the nozzle must not project beyond the wall of the headder pipe. Minimum recommended pipe size is 1" schedule 80. Optimum thred engagement occurs on pipe 1-1/4" schedule 80 and larger. Usual operating pressures are up to 150 psi.

TYPICAL APPLICATIONS:
Suitable for a variety of washing and spraying applications.
- Parts Cleaning
- Metal Washing
- Dishwashers